Alu layer
The ALU layer is a reflecting material that is very resistant to tearing and shocks, but its killer advantage is that it reflects the UV rays. It regulates the heat of your boardbag surface and so, when ALU layer is placed up, your board will not be damaged if left hours in the sun.
Double gallon
Most of the boardbags are stitched with one gallon joining the top and bottom parts all around. Having used many boardbags we realized this joint is a sensible area, and it needs the best construction to resist.
On all our boardbags, we stitch a first gallon all around the top part, then stitch a second gallon all around the bottom part, to finish we stitch both gallon together. This is a long, expensive process but it assures us our boardbags will be the most durable possible.
Pvc patch protect
Some parts of the boardbags are sensible and are often dragged on the ground. For these we decided to use a PVC patch protection, which is the most resistant surface we could use.
Airvent system
Being confined in a wet, salty boardbag is clearly not a good situation. As we love your boards and gear, we would like it to be ventilated: we developed the Airvent rubber system to let the boardbag breathe and evacuate moisture and bad smells.
Premium 600D and Tarpaulin
The technologies and materials featured in this range will make these boardbags your best travelling friends for years, because boardbags share all your trips around the world. They are the tools, the devices and the witnesses.
