حامل ترايبود ليدلينسر لكشافات المنطقة 3 م، ترايبود ألومنيوم لكشافات العمل AF بارتفاع متدرج من 1 إلى 3 م
HUB
متوفر في مستودعنا في دبي
المنتج موجود في دبي وجاهز للشحن.
التوصيل السريع (دبي فقط): اطلب قبل 12 ظهرا يصلك اليوم، واطلب بعد 12 ظهرا يصلك غدا.
التوصيل العادي: غالبا في اليوم التالي داخل دبي، وخلال يومين في باقي الإمارات.
جديد
طلب مسبق
نفدت الكمية
حامل ترايبود ليدلينسر لكشافات المنطقة 3 م، ترايبود ألومنيوم لكشافات العمل AF بارتفاع متدرج من 1 إلى 3 م
686
الدفع عند الاستلام داخل الإمارات
توصيل مجاني للطلبات فوق 200 درهم داخل الإمارات
التوصيل خلال 1-3 أيام عمل داخل الإمارات
رمز المنتج: LL503212
توفر: متوفر (8 قطع)
معلومات المنتج
الميزات
المواصفات
تعليقات العملاء
معلومات المنتج
The Ledlenser Area Light Tripod Stand lifts a Ledlenser AF Series work floodlight anywhere from 1 m to 3 m, with stepless height adjustment and a 7 kg maximum load. It suits contractors, event crews and campers who need wide, even light over a work site, a desert camp or a beach setup after dark.
The aluminium tripod weighs about 2 kg and folds down to 96 cm for the car boot. Non-slip feet, anchoring brackets for soft ground and a built-in spirit level keep it steady and level. It takes the AF4R Work, AF8R Work, AF12R Work and AF12C Work floodlights and the AL10R Work lantern through an M10 or 1/4 UNC thread.
الميزات
Feature
What it does for you
Stepless 1 to 3 m height
Set the light at exactly the height the job or camp needs.
7 kg load
Carries a Ledlenser AF Series floodlight with room to spare.
Lightweight aluminium
About 2 kg, easy to move between spots.
Adjustable non-slip feet
Each foot extends on its own and grips uneven ground.
Anchoring brackets
Secure the stand on soft ground and in wind.
Built-in spirit level
Level the stand quickly on site.
M10 and 1/4 UNC thread
Fits compatible Ledlenser AF Series lights and the AL10R Work lantern.
Which Ledlenser lights fit the Area Light Tripod Stand?▼
Ledlenser lists the AF4R Work, AF8R Work, AF12R Work and AF12C Work area floodlights and the AL10R Work lantern. They attach through an M10 or 1/4 UNC thread.
How high does the tripod go and how much can it hold?▼
The height adjusts steplessly from 1.00 m to 3.00 m and the stand carries up to 7 kg. The aluminium tripod itself weighs about 2 kg.
Is the tripod stable on sand or uneven ground?▼
Each foot extends on its own and has a rubberised non-slip pad, there are anchoring brackets for soft ground, and a built-in spirit level helps you set it up level.
