Mares Led Tank Module

The Led Tank Module pressure probe allows you to transmit the pressure value detected on the tanks directly to the integrated Mares dive computers. Through a colour code it is possible to have an immediate estimate of the level of gas present in a cylinder. Once mounted on the first stage on one of the two high pressure outlets (7/16″”) it can be associated with your computer in no time. Through a Colour Code LED it can be used as a pressure gauge even when on the surface. The probe has a flashing LED that indicates the gas pressure using colour codes: green for over 180 bar, yellow at 100 bar and red below 50 bar. Through the use of the Mares Sonda HP Wireless Module Tank LED the integrated dive computer is able to provide you with the real consumption in litres once the cylinder volumes have been set, thus optimising bottom times according to the decompression gas supply. To prevent excessive battery consumption through flashing, if there is no change of more than 1 bar for more than 4 minutes, the flashing is deactivated. The battery is a CR123A and allows between 150 and 200 dives taking into account temperate operating temperatures. The main features of the Led Tank Module pressure probe are: – Transmits tank information – Coloured LED for a quick check of the tank on the surface – Coloured LED to signal low air situations to your buddy during the dive – Storage of computer/probe pairing – En250:2014 certified to 300 bar – Battery type: cr123a, user-replaceable”.